› Formulation Screening, Parameter Optimization and Scale-up of Grinding Processes with Agitator Bead Mills - Stefan Mende, NETZSCH Feinmahltechnik GmbH
10:15-10:35 (20min)
› Tailoring hydroxyapatite suspensions by stirred bead milling as a pre-processing step for additive manufacturing technologies - Pedro Jesús Navarrete Segado, Centre interuniversitaire de recherche et díngenierie des matériaux, Laboratoire de Génie Chimique
10:35-10:55 (20min)
› Energy-efficient solution in ultra-fine grinding of ceramic raw materials - Benjamin Biber, HOSOKAWA ALPINE AG, Augsburg - Steffen Sander, HOSOKAWA ALPINE AG, Augsburg
10:55-11:15 (20min)
› Wet comminution of engineering thermoplasts in stirred media mills - Jochen Schmidt, Friedrich-Alexander-Universität Erlangen-Nürnberg
11:15-11:35 (20min)
› Sequential multicomponent comminution of anode slurries for lithium-ion batteries - Maximilian Tobaben, Institute for Particle Technology; Technical University of Braunschweig
11:35-11:55 (20min)
› Wet nanomilling of drug materials using a Zr-complex as stabilization mechanism -
11:55-12:15 (20min)
10:15 - 12:15 (2h)
Coarse Grinding and Classification
Amphitheatre 100
Session I.2
› The Influence of Feed Component Density on the Performance of Semi-inverted Hydrocyclones -
10:15-10:35 (20min)
› Pre-concentration of sulphide ores using a novel continuous high voltage pulse system design -
10:35-10:55 (20min)
› Vertical Roller Mill Operation with Alternative Classification Devices in a Minerals Processing Application -
10:55-11:15 (20min)
› Towards Green Economy in Mining Industry: Eco-Efficient Dry Comminution by Vertical Roller Mill (VRM) -
11:15-11:35 (20min)
› Measurement of size-dependant transport in a pilot AG mill -
11:35-11:55 (20min)
› Influence of grinders loading modes on the dissociation and hydration properties of wheat brans - Reine Barbar, Barbar
14:00-14:20 (20min)
› Control of cell destruction and proteins extraction of Tetraselmis suecica by stirred-bead milling: correlation of process parameters to cell lysis - Pauline DELRAN, Delran Pauline
14:20-14:40 (20min)
› How does milling impact the aspect ratio of miscanthus stem particles ? - Cecile Barron, IATE, Univ Montpellier, INRAE, Institut Agro
14:40-15:00 (20min)
14:00 - 15:00 (1h)
Mechanochemical and Surface transformations
Amphitheatre 100
Session II.2
› Solubility and Dissolution Kinetics Enhancement of a Hydrophobic Drug Using Dry Milling Mechanochemical Approach - Suenia de Paiva Lacerda, Université de Toulouse, IMT Mines Albi, UMR CNRS 5302, Centre RAPSODEE
14:00-14:20 (20min)
› Effect of stress conditions on mechanochemical synthesis of solid electrolytes in different high energy media mills - Arno Kwade, TU Braunschweig, Institute for Particle Technology
14:20-14:40 (20min)
› Attrition and leaching: two synergetic processes for pas-sivation limited hydrometallurgical processes - Adrien Dufourny, Laboratoire de Génie Chimique de Toulouse UMR 5503 - Amine Dakkoune, Laboratoire de Génie Chimique de Toulouse UMR 5503
14:40-15:00 (20min)
› Production of complex glass flakes by mechanical compression in a mill: From single particles to process design - Jan Schwenger, Institute of Particle Technology, Friedrich-Alexander Universität Erlangen-Nürnberg
16:00-16:20 (20min)
› Understanding the Relationship Between the Initial Particle Bed Packing and Compression Comminution - Giovanni Pamparana, University of British Columbia
16:20-16:40 (20min)
› Analysis of Particle Impact Damage by Material Point Method - Saba Saifoori, University of Leeds
16:40-17:00 (20min)
› Influence of rheological behavior of lactose powders on the weight consistency of tablets - Aurélien Neveu, GranuTools
17:00-17:20 (20min)
› Attrition/fragmentation of limestone particles during fluidised bed sorption-enhanced gasification - Fabio Montagnaro, University of Naples "Federico II"
17:20-17:40 (20min)
16:00 - 17:40 (1h40)
Innovations in Classification
Amphitheatre 100
Session III.2
› Development of a Guide Ring Classifier for Fine Classification - Daniel-Christian Karhoff, NEUMAN & ESSER Process Technology GmbH
16:00-16:20 (20min)
› Conceptual model structure of transport in mills - Malcolm Powell, University of Queensland
16:20-16:40 (20min)
› Smart Screening for Optimum Efficiency - Holger Lieberwirth, TU Bergakademie Freiberg
16:40-17:00 (20min)
› Particle fractionation using a crossflow with superimposed electrical field - Simon Paas, Technische Universität Kaiserslautern
17:00-17:20 (20min)
› About dynamic modeling of nanoparticle classification in tubular bowl centrifuges - Gleiß Marco, Institute of Mechanical Process Engineering and Mechanics, Karlsruhe Institute of Technology (KIT)
17:20-17:40 (20min)
› Exploring Particle Breakage Regimes via DEM - Jennifer Curtis, Jennifer Curtis
09:45-10:05 (20min)
› Investigation of effect of roller wear in HPGR operation us-ing a hybrid DEM-PBM approach - Victor Rodriguez, Universidade Federal do Rio de Janeiro
10:05-10:25 (20min)
9:45 - 10:25 (40min)
Fine Classification
Amphitheatre 100
Session IV.2
› Ultra fine classification with superheated steam - Christian Höfels, NETZSCH Trockenmahltechnik GmbH
09:45-10:05 (20min)
› Model-based control of centrifugal classification for intelligent Direct Recycling of Li-ion battery electrodes - Tabea Sinn, Institute for Mechanical Process Engineering and Mechanics, Karlsruhe Institute of Technology (KIT)
10:05-10:25 (20min)
› Mechanistic simulation of dry media mills – from millimeter down to the sub-micrometer scale -
11:30-11:50 (20min)
› Mechanistic modeling and simulation of multi-component batch ball milling of iron ore -
11:50-12:10 (20min)
› A novel online modeling and simulation approach for pressing iron ore concentrates in industrial-scale HPGR -
12:10-12:30 (20min)
11:30 - 12:50 (1h20)
Recycling and Coarse Grinding
Amphitheatre 100
Session V.2
› Modelling and Dynamic Flowsheet Simulation of a Cutting Mill for Use in Lithium-Ion Battery Recycling - Franziska Punt, Technical University Braunschweig
11:30-11:50 (20min)
› Recycling of refrigerators: Linking design decisions and liberation behaviour - Thomas Mütze, Helmholtz-Zentrum Dresden-Rossendorf, Helmholtz Institute Freiberg for Resource Technology
11:50-12:10 (20min)
› An experimental milling study on UO2 powder: influence of the drum size and some milling parameters - Anne-Charlotte Robisson, Centre de recherche du Commissariat à l'Energie Atomique - CEA Cadarache (Saint Paul-lez-Durance, France)
12:10-12:30 (20min)
› Quantifying Electrification Requirement of Mobile Crushing Units in Swedish SME Quarries - Gauti Asbjornsson, Chalmers University of Technology
12:30-12:50 (20min)
› Experimental comparison of wet and dry batch stirred media milling and the application of the continuity theory - Ádám Rácz, University of Miskolc - József Faitli, University of Miskolc
09:45-10:05 (20min)
› Experimental determination and optimization of the energy transfer coefficient of a stirred media mill - David Sterling, Technical University Braunschweig Institute for Particle Technology
10:05-10:25 (20min)
9:45 - 10:25 (40min)
Innovations in Grinding
Amphitheatre 100
Session VI.2
› Artificial intelligence in comminution - Christoph Thon, Institute for Particle Technology (iPAT), Technical University Braunschweig
09:45-10:05 (20min)
› Machine learning based impact crusher monitoring -
10:05-10:25 (20min)
› Scalable production of two-dimensional materials by stirred media delamination - Cornelia Damm, Institute of Particle Technology (LFG) Friedrich-Alexander University Erlangen-Nuremberg
11:30-11:50 (20min)
› Selective agglomeration of submicron particles from wet fine grinding with potential for wear separation - Christoph Peppersack, Technische Universität Braunschweig = Technical University of Braunschweig [Braunschweig]
11:50-12:10 (20min)
› Ultra-fine ceramic media for efficient nano-milling - David Bouttes, Saint-Gobain Research Provence
12:10-12:30 (20min)
› Autogenous grinding in stirred media mills for low-contamination production of silicon nanoparticles - Marcel Filipe Möller, Institute for Particle Technology; Technical University of Braunschweig
12:30-12:50 (20min)
11:30 - 12:50 (1h20)
Coarse Grinding and Classification
Amphitheatre 100
Session VII.2
› Advancement in ore characterisation using Precision Rolls Crusher - Shujaat Ali, Shujaat Ali - Malcolm Powell, Malcolm Powell
11:30-11:50 (20min)
› SAG mills - changes in response between conventional ball load levels and high steel load operating regimes - Aubrey Mainza, Aubrey N Mainza
11:50-12:10 (20min)
› Interaction between crushing and milling in an SAB circuit - Paul Bepswa, Paul Bepswa
12:10-12:30 (20min)
› The breakage characteristics of different liberation classes during primary breakage - Hayla Miceli, Julius Kruttschnitt Mineral Research Centre, Sustainable Minerals Institute
12:30-12:50 (20min)
› DEM Simulation of Particle Attrition in Mechanofusion Device - Wei Pin Goh, School of Chemical and Process Engineering, University of Leeds, Leeds
13:30-13:50 (20min)
› DEM Modeling of particle breakage inside rotating drums - Jean-Yves Delenne, IATE, INRA, CIRAD, Montpellier SupAgro, University of Montpellier
13:50-14:10 (20min)
› Single particle tracking in DEM for use in validation of PEPT experiments in a horizontal stirred mill - Sherry Bremner, Centre for Minerals Research, Chemical Engineering, University of Cape Town, Cape Town, South Africa
14:10-14:30 (20min)
› Simulation of breakage of iron ore pellets using the discrete breakage model - Horacio Petit, Universidade Federal do Rio de Janeiro
14:30-14:50 (20min)
13:30 - 14:50 (1h20)
Innovations in Grinding
Amphitheatre 100
Session VIII.2
› Influence of an internal deflector wheel on the transport behavior in stirred media mills -
13:30-13:50 (20min)
› Nanoparticle Fractionation: UV/vis Soft Sensor Development for Real-Time Process Monitoring -
13:50-14:10 (20min)
› Energy effectiveness in microwave-assisted size reduction methods -
14:10-14:30 (20min)
Loading... 
Amphitheatre 300
https://escc2022.sciencesconf.org/data/program/Abstract_Analysis_of_Dynamics_of_Spiral_Jet_Mills_by_Coupled_CFD_DEM_Keynote_Ghadiri_ESCC2022.pdf
