Sunday, June 26, 2022

Time Event (+)
17:00 - 19:00 Welcome reception and registration - Cocktail - Welcome reception and Registration & Cocktail Place : Salons de Marjavol  

Monday, June 27, 2022

Time Event (+)
08:30 - 09:00 Arrival and registration – Refreshments - Arrival and registration – Refreshments Place : Amphi 300 - ENSIACET  
09:00 - 09:30 Conference Opening (Amphitheatre 300) - : Christine Frances & Alain Chamayou  
09:30 - 10:15 Plenary Conference I : Autonomous comminution circuits – Opportunities and challenges (Amphitheatre 300) - As. Pr. Mohsen Yahyaei, Sustainable Minerals Institute, University of Queensland  
10:15 - 12:15 Fine Grinding and Classification (Amphitheatre 300) - Session I.1 (+)  
10:15 - 10:35 › Formulation Screening, Parameter Optimization and Scale-up of Grinding Processes with Agitator Bead Mills - Stefan Mende, NETZSCH Feinmahltechnik GmbH  
10:35 - 10:55 › Tailoring hydroxyapatite suspensions by stirred bead milling as a pre-processing step for additive manufacturing technologies - Pedro Jesús Navarrete Segado, Centre interuniversitaire de recherche et díngenierie des matériaux, Laboratoire de Génie Chimique  
10:55 - 11:15 › Energy-efficient solution in ultra-fine grinding of ceramic raw materials - Benjamin Biber, HOSOKAWA ALPINE AG, Augsburg - Steffen Sander, HOSOKAWA ALPINE AG, Augsburg  
11:15 - 11:35 › Wet comminution of engineering thermoplasts in stirred media mills - Jochen Schmidt, Friedrich-Alexander-Universität Erlangen-Nürnberg  
11:35 - 11:55 › Sequential multicomponent comminution of anode slurries for lithium-ion batteries - Maximilian Tobaben, Institute for Particle Technology; Technical University of Braunschweig  
11:55 - 12:15 › Wet nanomilling of drug materials using a Zr-complex as stabilization mechanism - Scott Maar - Institute of Particle Technology (LFG) Friedrich-Alexander University Erlangen-Nuremberg  
10:15 - 12:15 Coarse Grinding and Classification (Amphitheatre 100) - Session I.2 (+)  
10:15 - 10:35 › The Influence of Feed Component Density on the Performance of Semi-inverted Hydrocyclones - Mussa Lisso - JKMRC, Sustainable Minerals Institute, University of Queensland, Brisbane  
10:35 - 10:55 › Pre-concentration of sulphide ores using a novel continuous high voltage pulse system design - Flávio P. André - Julius Kruttschnitt Mineral Research Centre, Sustainable Minerals Institute, The University of Queensland  
10:55 - 11:15 › Vertical Roller Mill Operation with Alternative Classification Devices in a Minerals Processing Application - Warren Little - Warren W Little  
11:15 - 11:35 › Towards Green Economy in Mining Industry: Eco-Efficient Dry Comminution by Vertical Roller Mill (VRM) - Hamid Reza Manouchehri - SWERIM  
11:35 - 11:55 › Measurement of size-dependant transport in a pilot AG mill - Malcolm Powell - University of Queensland  
12:15 - 13:30 Lunch (Hall - Main entrance)  
13:30 - 14:00 Keynote I: About the significance to run media milling processes under optimal conditions (Amphitheatre 300) - S. Breitung-Faes, University of Applied Science, Nürnberg, Germany  
14:00 - 15:00 Biorefinery and Food industries (Amphitheatre 300) - Session II.1 (+)  
14:00 - 14:20 › Influence of grinders loading modes on the dissociation and hydration properties of wheat brans - Reine Barbar, Barbar  
14:20 - 14:40 › Control of cell destruction and proteins extraction of Tetraselmis suecica by stirred-bead milling: correlation of process parameters to cell lysis - Pauline DELRAN, Delran Pauline  
14:40 - 15:00 › How does milling impact the aspect ratio of miscanthus stem particles ? - Cecile Barron, IATE, Univ Montpellier, INRAE, Institut Agro  
14:00 - 15:00 Mechanochemical and Surface transformations (Amphitheatre 100) - Session II.2 (+)  
14:00 - 14:20 › Solubility and Dissolution Kinetics Enhancement of a Hydrophobic Drug Using Dry Milling Mechanochemical Approach - Suenia de Paiva Lacerda, Université de Toulouse, IMT Mines Albi, UMR CNRS 5302, Centre RAPSODEE  
14:20 - 14:40 › Effect of stress conditions on mechanochemical synthesis of solid electrolytes in different high energy media mills - Arno Kwade, TU Braunschweig, Institute for Particle Technology  
14:40 - 15:00 › Attrition and leaching: two synergetic processes for pas-sivation limited hydrometallurgical processes - Adrien Dufourny, Laboratoire de Génie Chimique de Toulouse UMR 5503 - Amine Dakkoune, Laboratoire de Génie Chimique de Toulouse UMR 5503  
15:00 - 16:00 Visit of Chemical Enginnering Laboratory - Refreshments – Posters - Exhibition - Refreshments – Posters – Exhibition Visit of Chemical Enginnering Laboratory  
16:00 - 17:40 Fundamentals of particle breakage (Amphitheatre 300) - Session III.1 (+)  
16:00 - 16:20 › Production of complex glass flakes by mechanical compression in a mill: From single particles to process design - Jan Schwenger, Institute of Particle Technology, Friedrich-Alexander Universität Erlangen-Nürnberg  
16:20 - 16:40 › Understanding the Relationship Between the Initial Particle Bed Packing and Compression Comminution - Giovanni Pamparana, University of British Columbia  
16:40 - 17:00 › Analysis of Particle Impact Damage by Material Point Method - Saba Saifoori, University of Leeds  
17:00 - 17:20 › Influence of rheological behavior of lactose powders on the weight consistency of tablets - Aurélien Neveu, GranuTools  
17:20 - 17:40 › Attrition/fragmentation of limestone particles during fluidised bed sorption-enhanced gasification - Fabio Montagnaro, University of Naples "Federico II"  
16:00 - 17:40 Innovations in Classification (Amphitheatre 100) - Session III.2 (+)  
16:00 - 16:20 › Development of a Guide Ring Classifier for Fine Classification - Daniel-Christian Karhoff, NEUMAN & ESSER Process Technology GmbH  
16:20 - 16:40 › Conceptual model structure of transport in mills - Malcolm Powell, University of Queensland  
16:40 - 17:00 › Smart Screening for Optimum Efficiency - Holger Lieberwirth, TU Bergakademie Freiberg  
17:00 - 17:20 › Particle fractionation using a crossflow with superimposed electrical field - Simon Paas, Technische Universität Kaiserslautern  
17:20 - 17:40 › About dynamic modeling of nanoparticle classification in tubular bowl centrifuges - Gleiß Marco, Institute of Mechanical Process Engineering and Mechanics, Karlsruhe Institute of Technology (KIT)  
17:40 - 18:10 Keynote II: Analysis of the dynamics of particle and fluid motions in spiral jet mills by DEM & CFD simulation (Amphitheatre 300) - Pr. Mojtaba Ghadiri, University of Leeds, UK
 
18:10 - 19:10 Free time  
19:10 - 21:00 Social Event - Barbecue  

Tuesday, June 28, 2022

Time Event (+)
09:00 - 09:45 Plenary Conference II: The 4M Business for Drug Nanoparticles and Nanocomposites: Making, Manipulating, Measuring and Modeling (Amphitheatre 300) - E. Bilgili, New Jersey Institute of Technology (NJIT), USA  
09:45 - 10:25 Process modelling (Amphitheatre 300) - Session IV.1 (+)  
09:45 - 10:05 › Exploring Particle Breakage Regimes via DEM - Jennifer Curtis, Jennifer Curtis  
10:05 - 10:25 › Investigation of effect of roller wear in HPGR operation us-ing a hybrid DEM-PBM approach - Victor Rodriguez, Universidade Federal do Rio de Janeiro  
09:45 - 10:25 Fine Classification (Amphitheatre 100) - Session IV.2 (+)  
09:45 - 10:05 › Ultra fine classification with superheated steam - Christian Höfels, NETZSCH Trockenmahltechnik GmbH  
10:05 - 10:25 › Model-based control of centrifugal classification for intelligent Direct Recycling of Li-ion battery electrodes - Tabea Sinn, Institute for Mechanical Process Engineering and Mechanics, Karlsruhe Institute of Technology (KIT)  
10:25 - 11:30 Visit of Chemical Engineering Laboratory - Refreshments – Posters - Exhibition - Visit of Chemical Engineering Laboratory  
11:30 - 12:50 Process modelling (Amphitheatre 300) - Session V.1 (+)  
11:30 - 11:50 › Mechanistic simulation of dry media mills – from millimeter down to the sub-micrometer scale - Anderson Chagas - Technical University Braunschweig  
11:50 - 12:10 › Mechanistic modeling and simulation of multi-component batch ball milling of iron ore - Brena Rocha - Universidade Federal do Rio de Janeiro  
12:10 - 12:30 › A novel online modeling and simulation approach for pressing iron ore concentrates in industrial-scale HPGR - Túlio M. Campos - Universidade Federal do Rio de Janeiro  
11:30 - 12:50 Recycling and Coarse Grinding (Amphitheatre 100) - Session V.2 (+)  
11:30 - 11:50 › Modelling and Dynamic Flowsheet Simulation of a Cutting Mill for Use in Lithium-Ion Battery Recycling - Franziska Punt, Technical University Braunschweig  
11:50 - 12:10 › Recycling of refrigerators: Linking design decisions and liberation behaviour - Thomas Mütze, Helmholtz-Zentrum Dresden-Rossendorf, Helmholtz Institute Freiberg for Resource Technology  
12:10 - 12:30 › An experimental milling study on UO2 powder: influence of the drum size and some milling parameters - Anne-Charlotte Robisson, Centre de recherche du Commissariat à l'Energie Atomique - CEA Cadarache (Saint Paul-lez-Durance, France)  
12:30 - 12:50 › Quantifying Electrification Requirement of Mobile Crushing Units in Swedish SME Quarries - Gauti Asbjornsson, Chalmers University of Technology  
12:50 - 14:00 Lunch Break (Hall - Main entrance)  
14:00 - 15:00 Bus Transportation to Albi - Bus Transportation to Albi  
15:00 - 17:00 Visit of Laboratories in IMT Mines Albi - Refreshments - Visit of Laboratories in IMT Mines Albi - Refreshments  
17:00 - 19:00 Guide tour in Albi Center - Guide tour in Albi Center  
19:00 - 22:30 Conference Dinner – L’Orangerie - Chateau Salies (L’Orangerie - Château Saliès)  
22:30 - 23:30 Bus transportation to Toulouse Hotels - Bus transportation to Toulouse Hotels  

Wednesday, June 29, 2022

Time Event (+)
09:00 - 09:45 Plenary Conference III : Recent developments and future prospects in comminution and classification at the chemical industry (Amphitheatre 300) - Dr. Frank Müller, BASF SE, Germany  
09:45 - 10:25 Fine Grinding and Classification (Amphitheatre 300) - Session VI.1 (+)  
09:45 - 10:05 › Experimental comparison of wet and dry batch stirred media milling and the application of the continuity theory - Ádám Rácz, University of Miskolc - József Faitli, University of Miskolc  
10:05 - 10:25 › Experimental determination and optimization of the energy transfer coefficient of a stirred media mill - David Sterling, Technical University Braunschweig Institute for Particle Technology  
09:45 - 10:25 Innovations in Grinding (Amphitheatre 100) - Session VI.2 (+)  
09:45 - 10:05 › Artificial intelligence in comminution - Christoph Thon, Institute for Particle Technology (iPAT), Technical University Braunschweig  
10:05 - 10:25 › Machine learning based impact crusher monitoring - Stephan Lange - Institute of Mineral Processing Machines and Recycling System Technology Technical University Bergakademie Freiberg  
10:25 - 11:00 Refreshments – Posters – Exhibition (Hall - Main entrance)  
11:00 - 11:30 Keynote III: Selective fragmentation of primary and secondary resources (Amphitheatre 300) - Dr. Kathy BRU, BRGM Orléans, France  
11:30 - 12:50 Fine Grinding and Classification (Amphitheatre 300) - Session VII.1 (+)  
11:30 - 11:50 › Scalable production of two-dimensional materials by stirred media delamination - Cornelia Damm, Institute of Particle Technology (LFG) Friedrich-Alexander University Erlangen-Nuremberg  
11:50 - 12:10 › Selective agglomeration of submicron particles from wet fine grinding with potential for wear separation - Christoph Peppersack, Technische Universität Braunschweig = Technical University of Braunschweig [Braunschweig]  
12:10 - 12:30 › Ultra-fine ceramic media for efficient nano-milling - David Bouttes, Saint-Gobain Research Provence  
12:30 - 12:50 › Autogenous grinding in stirred media mills for low-contamination production of silicon nanoparticles - Marcel Filipe Möller, Institute for Particle Technology; Technical University of Braunschweig  
11:30 - 12:50 Coarse Grinding and Classification (Amphitheatre 100) - Session VII.2 (+)  
11:30 - 11:50 › Advancement in ore characterisation using Precision Rolls Crusher - Shujaat Ali, Shujaat Ali - Malcolm Powell, Malcolm Powell  
11:50 - 12:10 › SAG mills - changes in response between conventional ball load levels and high steel load operating regimes - Aubrey Mainza, Aubrey N Mainza  
12:10 - 12:30 › Interaction between crushing and milling in an SAB circuit - Paul Bepswa, Paul Bepswa  
12:30 - 12:50 › The breakage characteristics of different liberation classes during primary breakage - Hayla Miceli, Julius Kruttschnitt Mineral Research Centre, Sustainable Minerals Institute  
12:50 - 13:30 Lunch (Hall - Main entrance)  
13:30 - 14:50 Process modelling (Amphitheatre 300) - Session VIII.1 (+)  
13:30 - 13:50 › DEM Simulation of Particle Attrition in Mechanofusion Device - Wei Pin Goh, School of Chemical and Process Engineering, University of Leeds, Leeds  
13:50 - 14:10 › DEM Modeling of particle breakage inside rotating drums - Jean-Yves Delenne, IATE, INRA, CIRAD, Montpellier SupAgro, University of Montpellier  
14:10 - 14:30 › Single particle tracking in DEM for use in validation of PEPT experiments in a horizontal stirred mill - Sherry Bremner, Centre for Minerals Research, Chemical Engineering, University of Cape Town, Cape Town, South Africa  
14:30 - 14:50 › Simulation of breakage of iron ore pellets using the discrete breakage model - Horacio Petit, Universidade Federal do Rio de Janeiro  
13:30 - 14:50 Innovations in Grinding (Amphitheatre 100) - Session VIII.2 (+)  
13:30 - 13:50 › Influence of an internal deflector wheel on the transport behavior in stirred media mills - Ann-Christin Böttcher - TU Braunschweig, Institut für Partikeltechnik  
13:50 - 14:10 › Nanoparticle Fractionation: UV/vis Soft Sensor Development for Real-Time Process Monitoring - Marvin Winkler - Institute of Mechanical Process Engineering and Mechanics, Karlsruhe Institute of Technology (KIT)  
14:10 - 14:30 › Energy effectiveness in microwave-assisted size reduction methods - Amin Shadi - Norman B. Keevil Institute of Mining Engineering, University of British Columbia, Hamid-Reza Manouchehri - Norman B. Keevil Institute of Mining Engineering, University of British Columbia, Swedish Research Institute for Mining, Metallurgy and Materials (SWERIM)  
14:50 - 15:10 Closing Ceremony (Amphitheatre 300)